IN-500 medical machine neonatal turbine drager mobile best anesthesia ventilator
| Customization: | Available |
|---|---|
| Used for: | All people |
| Pressure Limited: | 1.0kPa~ 6.0kPa |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Find Similar Products
Basic Info.
- Model NO.
- IN-500
- Lung compliance
- 30 mL / kPa
- Classification
- Physiological Functions of Diagnosis and Monitori
- I/E Ratio
- 1:1.5~1:3.0
- Respiration Frequency
- 6~60 bpm
- IMV Frequency
- 1~12 times /Min
- Certification
- CE, MSDS, ISO13485
- Transport Package
- Carton or Wooden Cases
- Trademark
- ICEN
- Origin
- Guangdong
- Production Capacity
- 200piece/Month
Product Description
Physical specifications:
Display LED Display
Mode: pneumatically powered and electrically controlled system
Trolley: Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions
Technical Specifications:
Gas requirement: Medical oxygen with a pressure ranging from 280~600kpa
safety valve <12.5 kPa
Respiratory Rate 6~60 times/ min
Oxygen concentration output <50%
minute volume ≥18L
modes of ventilation A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL
PEEP: 0.1 ~ 1.0 kPa
Ptr: -4 ~ 10 hPa
IMV frequency: 1~12 bpm
I/E Ratio: 1:1.5; 1:2.0; 1:2.5; 1:3.0
Tidal Volume 0-2000ml
Inspiratory Plateau: 0~1s
Sigh: one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point
Power Supply Alarm "Ac/dc power supply are after failing to send out alarm immediately
Alarm Time: keep >120s"
The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.
Operating conditions
| Ambient temperature | 10 ~ 40oC |
| Relative humidity | no higher than 80 % |
| Atmospheric pressure | 860 hPa ~ 1060 hPa |
| Power requirement | 100-240 Vac, 50/60 Hz; |
| Attention | the AC power supply used for the anesthesia machine must be well grounded. |
| Attention | the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993, an oxygen monitor complying with ISO 7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical Electrical Equipment Part II: Special Requirements for Safety and Basic Performance of Anesthesia System. |
Storage
Ambient temperature: -15oC ~ +50oC
Relative humidity: no higher than 95 %
Atmospheric pressure: 86 kPa ~ 106 kPa.
It should be stored in a room without corrosive gas and well ventilated
FAQ:
- How to buy your products ?Do you have distributor in our country?
- What is the warranty?
- Can we visit your country ?
- How long is the validity of quotation?
- Do you have the CE certificate ?
- What's the production date after we confirm the order ?
This depends on the quantity. Normally, for the mass production, we need about 7-10 days to finish the production.
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Product Groups
Find Similar Products By Category
- Supplier Homepage
- Products
- Ventilator & Anesthesia Machine
- Ventilator
- IN-500 medical machine neonatal turbine drager mobile best anesthesia ventilator